Home > Residential lighting > Low Profile Disk Light > 6 Inch - 4000K - 8Packs
  • 6 Inch - 4000K - 8Packs
  • 6 Inch - 4000K - 8Packs
  • 6 Inch - 4000K - 8Packs
  • 6 Inch - 4000K - 8Packs
  • 6 Inch - 4000K - 8Packs
  • Low Profile Disk Light - 6 Inch - 4000K - 8Packs
  • Low Profile Disk Light - 6 Inch - 4000K - 8Packs
  • Low Profile Disk Light - 6 Inch - 4000K - 8Packs
  • Low Profile Disk Light - 6 Inch - 4000K - 8Packs
  • Low Profile Disk Light - 6 Inch - 4000K - 8Packs

Low Profile Disk Light - 6inch

JULLISON 8 Packs 6 inch LED Low Profile Recessed & Surface Mount Disk Light, Round, 15W, 900 Lumens, 4000K Cool White, CRI80, Driverless Design, Dimmable, Energy Star, ETL Listed, White

Price:$63.92

AC DISK LIGHT DESCRIPTION

AC Disk Light - 6inch

Details information:

 LED disk light makes it easy to upgrade your existing recessed lights to energy efficient LED or flush mount on junction box for new construction site to avoid using recessed can.

 Provides surface mount light for 4 inch junction boxes or fire rated boxes. It is suitable for use in dry, damp or wet location such as shower room/fire box around.

 120V operation with TRIAC/ELV dimming down to 10%, >900 lumens of pleasant, low glare pleasant light.

 ENERGY STAR, Saves up to 80% in energy consumption comparing to incandescent lamp, 100W halogen equivalent. cETLus Listed.

 Easy installation and instant on make you feel convenient and different from what you used to have for light up your room.

Ac Disk Light Description:

Jullison Led Dob Disk Light Surface Mount Installation:

Step1) Prior to installation. Please install two screws (furnished)into the junction box. Do not drive screws completely to the end of the junction box.

Step2) Connect supply wires to wires in fixture wiring box with proper size wire nuts or push wires into “push-in” connector. Connect white to white, black to black, and green or bare copper wire to bare copper wire.

Step3) The ground wire at the service junction box may need to be secured to a ground screw.

Step4) With a Phillips screwdriver, attach the disk light tightly to the j-box.

Step5) Complete the installation by twisting the diffuser on the disk light aluminum enclosure and lock the diffuser in place.

Step6) The edge of the fixture and the ceiling use waterproof silicone to seal.

Warning:

For your safety read and understand instructions completely before staring instructions. Before wiring to power supply, turn off electricity at the fuse or circuit breaker box.

 

1. Risk of Fire:

supply conductors (power wires) connecting the fixture must be rated minimum 90℃. If uncertain, consult an electrician.

2. Risk Of Electric Shock:

disconnect power at fuse or circuit breaker before installing or servicing.

3. Risk Of Fire/Electric Shock:

if not qualified, consult an electrician.

Caution:

This product must be installed in accordace with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.

Application scenarios:

  • AC Disk Light - 6inch
  • AC Disk Light - 6inch
  • AC Disk Light - 6inch

Copyright © JULLISON LED LLC. All Rights Reserved. Design By Gemelsoft.